EcoFlow is opening up its home batteries to the smart home: a firmware update for the STREAM 5000 and STREAM AC 5000 adds a Local Mode that works without the EcoFlow cloud and an official Home Assistant integration. According to EcoFlow, the rollout starts on 17 November and should take about a week. The EcoFlow app will notify you once the update is available for your device.
Both features are optional and switched off by default.
Local Mode: control the battery without the cloud
In Local Mode the system no longer connects to the EcoFlow cloud. Your phone talks to the battery directly over your home network. According to EcoFlow, the app still shows real-time energy flows, total power, battery level and device status. You can still control self-consumption, battery charging, grid charging power and feed-in, among other things.
Some features are not available in Local Mode:
- AI Mode and the time-based custom mode,
- remote access when you are away,
- historical statistics (only real-time data, nothing is stored),
- firmware updates,
- device sharing, automations and cloud-based connections to other manufacturers’ devices.
You can switch back to cloud mode at any time. Firmware updates are only available there.
Last updated on 2026-11-17 / affiliate links / images from the Amazon Product Advertising API. Prices shown may have changed since then. All information without guarantee. * = affiliate link: if you order a product through such a link, we receive a commission from the seller. There are no extra costs for you.
Home Assistant: official integration via Modbus TCP
EcoFlow has released its own integration for Home Assistant. It uses a local Modbus TCP interface on the battery, so it works without the cloud. EcoFlow points out that it is not a Home Assistant core integration. You install it as a custom integration via HACS from EcoFlow’s official GitHub repository.
Setup works like this:
- In the EcoFlow app, grant access under “Third-Party Control”. The Modbus TCP switch is off by default.
- Choose the permissions: view only, or view and control.
- Home Assistant finds the battery on your home network via mDNS. Alternatively, you enter the IP address and port manually.
According to EcoFlow, Home Assistant then shows solar generation, household consumption, grid power, battery level and power values. You can adjust the limits for charging power, feed-in power and inverter output power as well as the backup reserve and charge limit, among other settings. This lets you link the battery with a heat pump, an EV charger or a time-of-use electricity tariff.
Some things stay locked, such as unlocking grid feed-in power, line protection, installer-level settings, low-level EMS and BMS parameters, and pairing or unpairing devices. If the connection to Home Assistant is lost for one minute, EcoFlow’s own energy management takes over again.
The Modbus TCP interface is open, so you can also connect the battery to other local systems if you want to.
Last updated on 2026-11-17 / affiliate links / images from the Amazon Product Advertising API. Prices shown may have changed since then. All information without guarantee. * = affiliate link: if you order a product through such a link, we receive a commission from the seller. There are no extra costs for you.
Which devices get the update
For now, only the STREAM 5000 and STREAM AC 5000 are supported. According to EcoFlow, more models will follow later.
The previous generation (STREAM Ultra, Ultra X, Pro, Max, AC and AC Pro) cannot use either feature on its own. If it is part of a system with a STREAM 5000 or STREAM AC 5000, however, the whole system can be controlled locally and via Home Assistant.
At a glance
| Devices | EcoFlow STREAM 5000, STREAM AC 5000 |
|---|---|
| New | Local Mode, official Home Assistant integration |
| Rollout | from 17 November 2026, over about a week, notification in the app |
| Interface | local Modbus TCP API (open) |
| Home Assistant | custom integration (HACS), discovery via mDNS, not a core integration |
| Permissions | view only, or view and control |
| HA connection lost | after 1 minute, EcoFlow’s energy management takes over again |
| Not in Local Mode | AI Mode, remote access, historical statistics, firmware updates, automations |
| Older STREAM devices | only in a system with a STREAM 5000 or STREAM AC 5000 |
You can find energy monitoring devices in our product overview.




