Gira switch actuators for KNX: twelve new DIN-rail models with 2 to 24 channels, Xpress configuration and KNX Secure

by Danny 4 min read
Gira switch actuators for KNX: twelve new DIN-rail models with 2 to 24 channels, Xpress configuration and KNX Secure
Contents (4 sections)
  1. What the new actuators can do
  2. All twelve versions
  3. Specifications
  4. Who it is for

Gira has introduced new switch actuators for KNX. The DIN-rail devices switch lighting, sockets and other loads, in homes as well as commercial buildings. There are twelve versions with 2 to 24 channels, each for 10 or 16 amps. All of them support KNX Secure. According to Gira, they are available now.

New to KNX? Switch actuators sit in the distribution board and switch the circuits, while push buttons and sensors send them commands over the bus cable. How it all fits together is covered in KNX explained.

What the new actuators can do

Every channel has its own control button and a status LED. Both line up with the matching terminal, so you can see in the distribution board which output is switching. Whether manual operation is allowed is set in the ETS. It can also be influenced or locked via the bus.

The Xpress configuration in the ETS cuts down commissioning work. You assign the outputs to predefined use cases, and your own templates are possible too. Anyone who wants to set everything themselves picks “Individual” and gets the full set of parameters. From ETS 6.5.0 the actuators also support Smart Linking: links are created by drag and drop at function level, and the ETS creates the group addresses automatically. According to Gira, this works across manufacturers within the KNX standard.

All models support KNX Data Secure, and the device software can be updated. Firmware updates run through the Gira KNX Service app.

According to the Gira catalogue, each output works as a normally open or normally closed contact. On top of that come time functions such as staircase lighting with pre-warning, up to 64 scenes per output, disable and forced positions, an operating hours counter and status feedback. Eight internal logic functions are also on board, for example AND, OR and XOR with up to four inputs, or threshold switches.

All twelve versions

The 24-channel models take up 12 modules (TE) in the distribution board.

Item no. Model Width
5125 00 Switch actuator 2-gang 10 A 2 modules
5126 00 Switch actuator 4-gang 10 A 4 modules
5127 00 Switch actuator 8-gang 10 A 6 modules
5128 00 Switch actuator 12-gang 10 A 8 modules
5129 00 Switch actuator 16-gang 10 A 8 modules
5130 00 Switch actuator 24-gang 10 A 12 modules
5005 00 Switch actuator 2-gang 16 A 2 modules
5006 00 Switch actuator 4-gang 16 A 4 modules
5007 00 Switch actuator 8-gang 16 A 6 modules
5008 00 Switch actuator 12-gang 16 A 8 modules
5009 00 Switch actuator 16-gang 16 A 8 modules
5010 00 Switch actuator 24-gang 16 A 12 modules

The new actuators are not available on Amazon, you can find a comparable alternative here:

Gira 104600 KNX switch actuator 8-gang 16 A
Older eight-channel KNX switch actuator from Gira for the DIN rail.

Last updated on 2026-11-18 / affiliate links / images from the Amazon Product Advertising API. Prices shown may have changed since then. All information without guarantee. * = affiliate link: if you order a product through such a link, we receive a commission from the seller. There are no extra costs for you.

Specifications

16 A range (5005 00 to 5010 00) 10 A range (5125 00 to 5130 00)
Medium KNX TP KNX TP
Switching voltage AC 250 V AC 250 V
Switching current AC1 16 A 10 A
Fluorescent lamps 16 AX (140 µF) 10 AX (140 µF)
Max. inrush current 235 A for 1000 µs 170 A for 700 µs
Load per output incandescent 1500 W, HV LED 400 W, motors 1150 VA incandescent 1300 W, HV LED 200 W, motors 1150 VA
Adjacent outputs max. 20 A combined max. 20 A combined
Circuit protection max. B16 max. B16
Terminals screw terminals, max. 4 mm² or 2 × 2.5 mm² screw terminals, max. 4 mm² or 2 × 2.5 mm²
Relays bistable bistable
Bus current 5 to 18 mA (24-gang: 5 to 24 mA) 5 to 18 mA (24-gang: 5 to 24 mA)
Ambient temperature −5 to +45 °C −5 to +45 °C
Security KNX Data Secure KNX Data Secure
ETS from ETS 5.7.7 or ETS 6.3, Smart Linking from ETS 6.5.0 from ETS 5.7.7 or ETS 6.3, Smart Linking from ETS 6.5.0
In the box actuator, KNX bus terminal, Secure Card, instructions actuator, KNX bus terminal, Secure Card, instructions

Who it is for

The actuators are powered by the bus voltage and mounted on the DIN rail in dry indoor rooms. They are planned and commissioned in the ETS. Homeowners mainly benefit indirectly: Xpress and Smart Linking shorten programming, and KNX Secure protects bus communication. If you are still deciding which system to use, KNX vs Loxone compares the two.

Sources are Gira’s press release and the data sheets in the Gira catalogue.

Featured image: Gira

Written byDanny, FounderFounder of InternetderDinge.blog, into smart home since the very first Philips Hue lamps. Meet the team
All search results